How to make a .17 hmr Rifle Stock from fibre-glass.
|Sometimes you need heavy weights to hold the barrel in place.|
|Joining the action mount to the stock with sawdust resin paste|
|Build up the paste a little higher than level so that ot can be sanded down level.|
|Make sure all your rifle parts are well waxed as it can get to be a big problem if you stick it permanently together.|
|Keep adding paste until it starts to shape up.|
|Keep a check on aligning centre.|
Page1 <<<<<Pg2<<<<Pg3 <<<< Pg4 <<<< Pg5 <<< Next >> Pg7